RENEWABLE ENERGY LABORATORY

Jan272010

installation of solar water heater

Posted under News by Webmaster at 19:31 on Jan 27 2010


installation

Keywords: , , ,

25 Responses to “installation of solar water heater”

  1. 1 catatonicableon 27 Jan 2010 at 20:22

    Its made/invented for colder climates, maybe its too efficient.

  2. 2 catatonicableon 27 Jan 2010 at 20:47

    How much is this system, and can you to send to South Africa.

  3. 3 sbrust1on 27 Jan 2010 at 21:24

    nice;)

  4. 4 jeunefredon 27 Jan 2010 at 22:14

    For the tubes, what I usually recommend my buyers is to install the plastic ring at the bottom first, then slide the tube into the plastic ring far enough that the other end of the tube is past the manifold. Then don’t just slide in the evacuated tube right in, But instead, pull the copper tip out and fit it first, then slide the evacuated tube. This way, you are sure that you get a full contact with the tip of the tube and the manifold.
    Then simply screw the plastic cap in

  5. 5 Weston1968on 27 Jan 2010 at 22:20

    Did you understand the Swedish Chef better?

    Cut & Paste:

    Muppet Show – Swedish Chef – making donut

  6. 6 Weston1968on 27 Jan 2010 at 22:45

    Bla bla bla! I totally agree with you. They may as well got the Swedish Chef of the Muppet show to demonstrate this, as I would have probably understood it better.

  7. 7 timh111on 27 Jan 2010 at 23:15

    WHAT THE HELL IS HE SAYING?????

  8. 8 Davidbzm01on 27 Jan 2010 at 23:49

    turn off the music !!

  9. 9 taraff1on 27 Jan 2010 at 23:52

    You can build a solar water heater very inexpensively using the plans at:
    ambigrid-review.blogspot(DOT)com

  10. 10 SlickManChouxon 28 Jan 2010 at 00:00

    Thanx for video
    My advice to you is take that purging valve on the top cos is going to blow up.
    Solar circuit doesn’t need purging point on top.What we need is bucket to recuperate the thermoconduct fluide from the pressure relief valve on the return from the cylindre.Too many fittings those flaring joints we use them on air cond….

  11. 11 bmpowellicioon 28 Jan 2010 at 00:02

    Nobody blows up their houses with a little plumbing, where did you get that idea?

    This sort of system is very straightforward to set up for anyone who has ever played with Lego, so don’t be put off by any dismissive comments.

    Plumbers are ten a penny.

  12. 12 spiderstoneon 28 Jan 2010 at 00:46

    Real nice video……..good teacher……
    can you buy these in the U.S.?

  13. 13 haokangcrystalon 28 Jan 2010 at 01:33

    in order to teach our client to know how to install it , we use video and voice to teach them , both can increase the understand of the installation. So the main user of the video is our client who knows english, so it works. Anyway, thank you for your suggestion

  14. 14 haokangcrystalon 28 Jan 2010 at 01:53

    Dear , Thank you very much for your attention to our company, and we are very pleasure to talk about the video. You see, we just do business with our client on net, and the main language is English

  15. 15 321ozzyon 28 Jan 2010 at 02:36

    And thanks to you for replying so fast and taking the advice positively.
    For following videos I would choose to leave out music (no music); most people who watch the video are non-native speakers of English and will face difficulties understanding the spoken word.
    Good luck.

  16. 16 haokangcrystalon 28 Jan 2010 at 03:12

    Thank you for your advice, this video just want to make our client know how to install it , if something else more, it will seems difficult to the clients, and when they know how to install it , they can install it as per their demand, we just show the structure.

  17. 17 321ozzyon 28 Jan 2010 at 03:52

    First of all thank you for the video.
    I would like to give some advice:
    Use teflon tape where necessary as Thieoni1 mentioned.
    What’s more, you should always polish the surface of the tubes with sanding paper before connecting them.
    Another point of improvement is tightening the joints well; they seemed to be rather loose, which will lead to leaks.

  18. 18 Baytitson 28 Jan 2010 at 03:59

    there should not be an automatic air vent at the top of the system if filled properly, they will only cause problems in the long rum. and you don’t use t-tape on compression. Hire a plumber, one with a license.

  19. 19 Baytitson 28 Jan 2010 at 04:22

    this is why people blow up there houses. hire a licenced plumber to install your hot water heaters. not handy men.

  20. 20 kricotoyon 28 Jan 2010 at 05:08

    how much will be to export to canada?
    montreal
    let me know….

  21. 21 Thieni1on 28 Jan 2010 at 05:15

    Nice, like the plastic end caps, but a bit sceptical not using teflon tape on some of the joints ;)

  22. 22 fanrongtracyon 28 Jan 2010 at 05:37

    we can supply solar water heater

  23. 23 reddog714on 28 Jan 2010 at 05:42

    what you say ????

  24. 24 higheriamon 28 Jan 2010 at 06:33

    thank you

  25. 25 stormchaser751on 28 Jan 2010 at 07:03

    thnx… great vid but not wut i wus lookin 4

Trackback URI | Comments RSS

Leave a Reply